HomeDoulton RIO-2000, Pentek Filters, Pentair Everpure Descalers

1xset of 6 Replacement Cartridges Rio-2000 System

Qty From Qty To Unit Price
1 £55.21
2 2 £51.59
3 3 £50.68
4 5 £49.07
6 8 £48.01
9 10 £46.06
You will earn 55 points with this purchase
Set of 6 replacement filter cartridges for the RIO 2000 High Flow Multi Candle Filter Module WITHOUT! the PLENUM MANIFOLD for the top.

The RIO 2000 Whole House Filter Multi Candle System Genuine Doulton Product
  • PLEASE NOTE: if your water has a high sediment content, you WILL need a sediment pre-filter.
  • Please see our SED-RIO-2000 this unit already has a pre-sediment filter included as a standard.
  • We also have a TRIPLE SEDIMENT RIO-2000.
  • The RIO-2000 unit is also available in a CLEAR HOUSING for ease of maintenance. You are of course welcome to select from our range of sedment pre-filters here: SEDIMENT FILTER UNITS
With the RIO-2000 you will get the following items (See image above too):
  • 1 x 4"x10" big blue or a big clear housing with 1" inlet & outlet ports (if you want the RIO-2000 in a CLEAR Housing click here)
  • 1 x fixing bracket
  • 4 x fixing bolts & 4 x screws
  • 6 x rio-2000 inner cartridges with plenum & inner supporting tube
  • 1 x cleaning brush for above cartridges 1 x housing spanner
  • Please note: the plenum is the manifold that all six cartridge fit into, unless your manifold is broken or damaged you will not need the replacement with the manifold
Suitable for whole house or whole kitchen installation
  • A comparable system that uses Reverse Osmosis or Ultra Violet Light would cost anywhere from £200.00 to £600.00 this system is both efficient & cost effective. Truly very good value for money.
  • Doulton®, the brand synonymous with top quality drinking water filters for 175 years, is able to offer a new, compact, high-flow filtration solution for the home.
the RIO 2000 High Flow Multi Candle Filter Module details:
Doulton’s unique 6 element filter module fits the industry standard 10 inch “Big Blue” type housing. (which is supplied).
  • Filters you can trust - Ceramic filter elements manufactured in the UK under ISO conditions to meet international drinking water requirements.
  • High flow - Filter module offers a superior flow rate of up to 520 gallons (2000 litres) per hour at 3 bar pressure. (depending on supply water quality)
  • Excellent water flow even in low water pressure areas. Ceramic filters remove: Pathogenic bacteria (E-coli, Cholera, Typhoid, Salmonella, etc.). Cysts (Cryptosporidium, Giardia, etc.). (please see images for details of performance) Sub micron particle contamination. An added value alternative to UV water treatment systems, which does not require electricity.
RIO 2000 Ceramic Water Filter Operating and Exchange Instructions
Introduction
Follow the simple instructions given below and your filter will supply you with safe, clean drinking water for many years.
1. Installation Conditions
For use with COLD water only. Maximum Service Flow: 2000 Litres/Hour. Maximum Working Pressure: 100psig (689kPa) Minimum Working Pressure: 1.5bar Head
2. Cartridge Assembly
Take the manifold assembly (B) and ensure that the rubber seal (A) is correctly located into the recess. Push the support tube (C) securely into the central recess on the underside of the manifold. Remove each of the six filter candles (E) from its protective wrap and check that the o-ring seal (D) is located fully onto the threaded spigot. Screw the thread spigot into one of the holes in the underside of the manifold until washer resistance is felt and the  moulded cap just touches the ring on the underside of the manifold (B). Do not over tighten. Repeat for all six filter candles. Take the base moulding (F), ensure that the rubber seal (G) is located correctly into the recess and push the base securely onto the support tube (C) to complete the assembly.
3. Installation/Replacement
General removal and re-installation of the cartridge assembly is carried out as follows:

3.1. Isolate the water supply to the filter, vent any pressure and unscrew the filter body. Care should be taken, as it will be full of water.
3.2. The cartridge assembly can now be removed, taking care at all times not to contaminate the inside of the unit, and replaced or cleaned as described below.
3.3. To re-fit the cartridge assembly, ensure that the cartridge assembly is fitted into the sump of the filter with the manifold uppermost.
3.4. Screw the sump gently into the filter head, ensuring that the manifold locates correctly into the head and tighten until a seal is made. Do not over-tighten.
4. Conditioning the filter elements
In order to remove any loose particles resulting from manufacture of the filter elements, the water from the filter should be allowed to run to waste for 10 minutes. Allow the filter to stand for 24 hours to condition the filter to the source water and then flush for a further 10 minutes to waste. After carrying out this procedure, the filter is now ready for use.
5. General Use
The filtered water can now be used for drinking and preparing food. If the filter has been standing unused for more than 3 days, it is recommended that water be run to waste for 1 minute before use.
6. Cleaning the filter elements
  • Due to filtration of particulate contaminants from the water during use, the flow of water from the filter may reduce over a period of time.
  • To return the water flow to its normal level simply remove, clean and re-fit the cartridge assembly as follows:
    • Remove the cartridge assembly as described in section 3.
    • Take the assembly to the sink and stand it upright on the base moulding (F/G).
    • Loop the cleaning brush (supplied with the filter) under one of the six ceramic candles, hold under running water and slide the brush up and down until the ceramic is clean.
    • Repeat the cleaning operation on all six ceramic candles, taking care at all times not to contaminate the inside of the unit.
    • Alternatively, each of the six filter candles can be removed and cleaned individually.
    • The cartridge assembly is now ready to re-fit as described in section 3.
    • Wash hands thoroughly after cleaning the filter.
Write a review and share your thoughts with other shoppers.
MPN W9120145
Brand Fairey Doulton
Condition New